Latest cleaning equipments Tenders | Government cleaning equipments Tenders

State Government

CTN :45676047

02 Jul, 2026 36.58 Lacs

Bengaluru - Karnataka

Tender For annual maintenance & supply of materials, repairs to windows and doors, supply of water & sanitary fittings to krishna block, national games village, koramangala, bengaluru from august-2026 to july-2027 (reserved for sc)- item description: external sweeping and terrace cleaning - cleaning of outer periphery like roads footpaths curb stones terrace including removing grass dust etc., to the nearest garbage pit using suitable coconut broomstic,bombay broomstick, squezers /wipers /rubberbru , item description: cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of engineer-in-charge. (the old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ rs. 0.10 per litre) (if during cleaning any gi fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) , item description: cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge. the cleaning shall consist following operations:- tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. chlorination of rcc internal surface by liquid chlorine. the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. , item description: cleaning of sewer line by rodding equipment for dia above 150 mm.(while cleaning septic tank all safety and precautionary measures to be taken,standard operating procedure to be adopted and pemsr act 2013 to be strictly followed). , item description: providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. , item description: providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. , item description: providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete , item description: providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. , item description: providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.75x40x2.5 mm (ordinary type) , item description: providing and fixing isi marked oxidised m.s. handles conforming to is:4992 with necessary screws etc. complete : 75mm , item description: providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. - 50mm , item description: providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc complete as per directions of engineer- in-charge , item description: providing and fixing brass stop cock of approved quality : 15 mm nominal bore , item description: providing and fixing brass full way valve gate with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore , item description: providing and fixing brass full

CTN :45647222

30 Jun, 2026 7.00 Lacs

Sonipat - Haryana

Tender For purchase of tube cleaning equipments of ffes evaporators and pan etc. - purchase of tube cleaning equipment s of ffe s evaporators and pan etc., flexible shaft 16 mtr for ffe(make s.j industries, manacles, scaleaway, power flex)2965, foundry brush(make s.j industries, manacles, scaleaway, power flex)1980, hand piece flex shaft19mm (make s.j industries, manacles, scaleaway, power flex)5205, shaft flexible 7.5 mtr long (length of one no. shaft 7.5 mtr) (make s.j industries, manacles, scaleaway, power flex)1890, sphere beeds 42 mm (make s.j industries, manacles, scaleaway, power flex)1896, sphere pin 42 mm(make s.j industries, manacles, scaleaway, power flex)1897, spring 42 mm(make s.j industries, manacles, scaleaway, power flex)1898, t.h.cutter35.6mm for ffe(make s.j industries, manacles, scaleaway, power flex)5206, tool head cutter 42mm(make s.j industries, manacles, scaleaway, power flex)1892, tool head cutter 98mm (make s.j industries, manacles, scaleaway, power flex)1895, turck head brush 35.6mm for ffe(make s.j industrier, manacles, scaleaway, po wer flex)5209, turk head brush 42/43mm (make s.j industries, manacles, scaleaway, power flex)1971, turk head brush 98/102mm (make s.j industries, manacles, scaleaway, power flex)1974, evaporator tube expender suitable for id 42.6 mm(manacles, scaleaway, power flex make)1463, ffe tube expender suitable for id 35.6 mm(make s.j industries, manacles, scaleaway, power flex)1525

State Government

CTN :45621543

29 Jun, 2026 2.73 Lacs

Angamaly - Kerala

Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec

Central Government/Public Sector

CTN :45429089

30 Jun, 2026 NA

Hisar - Haryana

Tender For providing of 1.stationary & examination material 2. (laboratory/office equipment) 3. (material for cleaning & sweeping) 4. (furniture) 5. (ro/water purifier) 6. (air conditioners) 7. (musical instruments) 8. (pa system) 9. (computer software, hardware equipment's, cctv/lcd projectors/printer-xerox toner cartridge) 10. (water coolers) 11. (photocopier) 12. (electric items) 13. (building material cement, barjri reta, saria, bricks hardware items) 14. (sanitary items) 15. (sports items) 16. (fire safety equipment's) 17./(audio video teaching aid items) 18. (medicines & medical first add equipment). 19. banner/flex printing 20/library books & magazines.21. (id card printing). 1. (printing) 2. (gardening) 3. (house-keeping) 4. (security) 5. (electric-maintenance) 6. (carpentry) 7. (plumbing) 8. (civil-repairing) 9. (pest-control) 10. (white washing, painting work of building) 11. (data entry operators services) 12. (computer-printer/cctv/xerox machine/ro/air-conditioners etc, amc, printer xerox tonner refilling) 13. (transport bus/taxi services) 14. (catering service for sports meet)15. (boarding/lodging/tent services for sports meet). 16. vidyalaya canteen service. 16. (ragman services). 17 authorised firm to collect e-waste. 18. hire of fancy/other dress.

CTN :45398936

07 Jul, 2026 1.93 Lacs

Thiruvananthapuram - Kerala

Tender For purchase of cleaning equipments - cleaning equipments, auto scrubber dryer floor cleaning machine : voltage 220v/50hz/24v, squeegee 755 mm, brush diameter 20 inch, rolling brush motor 755 watt, cleaning width 510 mm, cleaning rate 1750 square meter per hour, brush pressure 30 kg, clean water capacity 40 l, dirty water capacity 50 l, noisable 65 db, type battery operated, heavy duty wet & dry vacuum cleaner 1100w, 270 m bar, minimum 10 l tank

Central Government And Public Sector

CTN :45370263

15 Jun, 2026 NA

Kathua - Jammu And Kashmir

Tender For providing of facility management service- manpower based (version 2) - industrial; cleaning sweeping and upkeeping of power house complex and its machineries and equipment at sewa ii power station distt-kathua for a period of 02 years; unskilled

corporations/Associations/Others

CTN :45325869

05 Jun, 2026 23.91 Lacs

Sabarkantha - Gujarat

Tender For 1. road sweeping and cleaning of main roads, internal roads and approach roads of vadali city area using latest road sweeping equipments, man power, machinery etc. including transportation of collected waste with required manpower, machineries and vehicles to solid waste disposal site in the best satisfactory manner and also submitting cleaning report periodically on monthly basis at vadali.2. sweeping and cleaning of public toilet block total 2 nos with man power, cleaning near by garbage nuisance points including transportation of collected waste solid waste disposal site in the best satisfactory manner and also submitting cleaning report periodically on weekly basis (note : rate should be quote on daily basis including requied cleaning equipment and chemical for manually cleaning job for a total 2 nos of public toilet) at vadali nagar palika area in vadali.

CTN :45270457

04 Jun, 2026 NA

Badaun - Uttar Pradesh

Tender For tender for supply of boiler cleaning equipments -flexible shaft as per specification attached , turk head brush size 69 mm , turk head brush size 58 mm , turk head brush size 98 mm , tool head cutter 56 mm complete

State Government

CTN :45228148

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of tube cleaning equipment - heavy duty flexible shaft with antifriction lining complete with 5/8" inner core and, hand piece of plain end bearing type suitable for cleaning of 37 mm i.d, brass/ss tubes. (with outer casing not more than 33mm), length 25, length 30, heavy duty flexible shaft with antifriction lining complete with 1/2" inner core and, hand piece of plain end bearing type suitable for cleaning of 37 mm i.d brass/ss, tubes. (with outer casing not more than 33mm), length 25, length 30, spare hand pieces having plain end bearing for above flexible shafts (5/8mm inner, core) for cleaning of 37 mm id brass tubes, plain end bearing for above flexible shafts (5/8mm inner core) for cleaning of 37, mm id brass tubes, motor side nipples suitable for 5/8 inner core having female threads on one side, and 11/16 size on other side total length of nipple shall be 2, - do - but having female threads on one side (hand piece side), turk head brushes for cleaning of, 37 mm i.d. tubes, 37.6 mm i.d. tubes, 42 mm i.d. tubes, 98 mm i.d. tubes, 96 mm i.d. tubes, tool head cutter of 15 gears with male thread of suitable for cleaning of 37 mm i.d., tube cleaning motor of 5 hp x 2900 rpm, kirloskar make, duly mounted one trolley,, complete with dol starter, 2 mtr cable., steel wire dusting brushes of size 8 x 4 having steel wire protruding 1 x 16, swg, steel wire dusting brush of size 6 x 2 with handle having spring steel wire, protruding 1 x 16 swg with 5 rows of 14 bunches having 40 wires in each bunch., cleaning equipments eng.., flexible shaft with short hand piece (for bend tube)with 12 mm inner core and 10 mt, inner core flexible shaft 3/4", inner core of dia 5/8" for above flexible shaft, inner core of dia 1/2" for above flexible shaft, flexible shaft with short hand piece for bend tubes, 12mm inner core x 16 mtr long, flexible shaft with short hand piece for bend tubes, 18mm inner core x 12 mtr long, flexible shaft with short hand piece for bend tubes , 18mm inner core x 21 mtr long, tool head cutter complete for boiler bent tubes suitable for cleaning of tubes, of, (a) 76.2 mm od tube, (b) 70.0 mm od tube, (c) 63.5 mm od tube, (d) 50.0 mm od tube, cutter wheel for, (a) 76.2 mm od tube, (b) 63.5 mm od tube, (c) 70.0 mm od tube, (d) 50.0 mm od tube, trunk head brush suitable for boiler, 50 mm, 56mm, 63.5mm, 70 mm, 72.6 mm, 76.2 mm, pins for tool head cutters of above sizes (as per sample), plain end bearing for above flexible shafts, (spare hand piece having double ball bearing for flexible shaft 18mm inner core with, nipple 55mm long), plain end bearing for above flexible shafts, (spare hand piece having double ball bearing for flexible shaft 12mm inner core with, nipple 55mm long), hand piece side nipple with socket suitable for " inner core 2" length, m.s. nipple with socket suitable for " inner core, 10"x2" polymer wheel suitable for 50/100 kg sugar carying trolley, sugar bag carryaing trolly heavy duty quality heaving angular frame based on 2 nos, heavy duty polymer vheels size 10" by 2" shelf lubricated duly furnished and painted, load carryong 150 kg.